You are just a shower away from smooth silky skin! Shower Power uses breakthrough technology with water-resistant properties so you can use Nair while you shower. The cream will resist washing off when you step in the shower. Remove Shower Power easily with our special dual-sided sponge.

Water , Urea , Mineral Oil , Potassium Thioglycolate , Calcium Hydroxide , Cetearyl Alcohol , Ceteareth-20 , Lanolin , Sodium Hydroxide , Silica , Propylene Glycol , Lavandula Angustifolia Flower Extract (Lavender) , Tocopherol , Fragrance.

Read the warnings section before use. Apply cream outside of shower: Skin must be dry before application. Remove plug from pump and turn counterclockwise to unlock. Dispense cream onto smooth side of the dry sponge with pump facing away from you and apply an even layer to cover hair. Do not rub in, Repeat until the entire area where hair to be removed is covered. Place sponge near tub/shower with bumpy side of the sponge down. Wait at least 1 minute before showering. Shower: Step into the shower and follow your usual routine. The cream will resist wash off, but a small amount of wash off is not unusual. For optimum product performance, keep skin where cream has been applied away from direct stream of water. Make sure the cream stays on your skin for at least an additional 2 minutes while in the shower. Do not exceed 10 minutes of total application time. Remove/rinse: Total hair removal depends on hair thickness. Rinse the sponge and use the bumpy side to remove the cream together with the hair in a small area. If the hair comes off easily, remove the rest of the cream by massaging in a circular motion. If the hair does not come off, leave the cream on longer without exceeding 10 minutes of total application time Once the cream and hair have been removed, rinse skin thoroughly under the shower. Do not rub Pat dry gently. Rinse the sponge. Wipe dispenser clean and close with plug when not in use. To keep skin smooth and radiant, apply your favorite moisturizer daily.